18
3.7 Side angle adjustment of the
chassis
Additional lateral inclination adjustment of the swather
can be carried out by loosening the screws (1) on the left
tandem arm, so that the tines are always guaranteed to
follow the contours of the land.
3.8 Adjusting the cam track
Loosen screws (1), unscrew screw (2), pull the adjusting
lever (3) forwards to the direction of travel, raise the tine
bars later (e.g. swath rotation), Push the adjusting lever
(3) to the back in the direction of travel, raise the tine
bars earlier (large swaths), reinsert screw (2) into an
available thread bore and refasten screws (1).
3.6 Adjusting the working depth
The exact swather disk height is adjusted with the
crank (1). Working depth setting depends on travelling
speed and crop conditions.
The feed is not completely gathered
if the setting is too high, and if it is set
too low can lead to soiling of the
feed, damage of green sward and to
increased wear of the twin spring
tines.
3
KS-308-0
2
KS-309-0
1
KS-319-0
2
1
KS-307-0
The effect of the "friction brake" for the adjusting crank
can be varied by releasing or tightening the nuts (2).