VI - 2
Service and maintenance
6.3 Tyres
• Installing wheels and tyres requires sufficient knowledge and the availability of proper tools!
• Repair work on the tyres and wheels may only be carried out by specialists using appropriate
tools!
• Set down rotary swather on firm, even ground. Prevent unintended rolling away with
wedges.
• Regularly check that wheel nuts are properly seated and tighten if necessary!
• Regularly check air pressure!
Check the tyre pressure at regular intervals and top up
air if necessary. The values can be taken from the
adjacent table.
Periodically check all bolts and nuts and retighten if necessary!
The tine screws (1) must be retightened to the specified
tightening torque after they have been used for the first
time.
KS300107
1
16 x 6.50 - 8
1,5
Type
Tyres
Tyre pressure
[bar]
Swadro 35
Swadro 38
Swadro 42
Swadro 46
Front support
16 x 6.50 - 8
1,5
wheel
In case of repair, the tine arms can be individually
replaced by demounting.
•
Unscrew the screws (1) of the tine arm.
•
Undo the screws (2) of the neighbouring tine arms.
•
Pull out tine arm (3) and replace defective parts.
•
When removing the tine arm, make sure that the
control roller is inserted into the track of curved path.
•
Tighten all screws with the torque required.
6.4 Replacing the tine arms (in
case of repair)
SW700031
3
1
2
Summary of Contents for Swadro 35
