Krone Swadro 1010, Operating Instructions Manual, Page: 51 / 74

VI - 3
Care and maintenance
In case of repair, the tine arms can be individually
replaced by demounting.
• Unscrew the screws (1) of the tine arm.
• Undo the screws (2) of the neighbouring tine arms.
• Pull out tine arm (3) and replace defective parts.
• When removing the tine arm, make sure that the
control roller is inserted into the track of curved path.
• Tighten all screws with the torque (105 Nm) required.
6.4 Replacing the tine arms (in
case of repair)
SW700031
3
1
2
6.5 Replacing the hydraulic hose
lines
Hydraulic hose lines are subject to ageing:
The characteristics of the hoses change due to effects of pressure, thermal load and UV
radiation. The date of manufacture is printed on the hydraulic hoses. This allows for the age to
be determined without lengthy searching. It is required by law that hydraulic lines are replaced
after a service life of six years.
Only use original spare parts as replacement hose lines!
6.3.3 Frame flanges
After first time use, the screws on the
frame flanges must be retightened.
210 Nm).
SW101041