Krone EASYCOLLECT 6000, Operating Instructions Manual, Page: 22 / 52

III - 4
Start-up
The system should be without
pressure on both sides when
connecting the hydraulic hoses.
Make sure the plugs and couplings
are clean; clean them if necessary.
• Connect the hydraulic hoses (1) to the plug-in
connections provided for this purpose on the forage
harvester.
• Connect the lighting cable (2) to the socket.
• Connect the connection cable (3) of the sensors.
• Swing the locking lever (2) to the rear and engage it
on the locking pin (3) with spring plug (4).
Check that the pendulum frame hooks
correctly into the holding bolts (1) and
the locking hooks on both sides.
• Push the joint fork (1) onto the drive journal (2) of the
main angular gear until the closure engages.
For additional settings to operate the
maize header, see the operating
instruction „Self-propelled forage
harvester BiG X“.
• Close the cover guard (3).
3 2
EC200170
1
1
2
EC200160
3
2
3
4
EC200150
1