Krone Big Pack 1270, Original Operating Instructions, Page: 331 / 440

Repairs, maintenance and settings by technicians 22
Setting packer relative to plunger 22.15
BiG Pack 1270
Original Operating Instructions 150000747_02_en 331
Adjusting packer relative to the plunger is only necessary if the following parts have been
disassembled:
• Packer coupling (4), packer gearbox (3), chain coupling (2)
• transfer gearbox (1) (or disassembling drive train transfer of transfer gearbox relative to
main gearbox (6))
• Crank arm (7) of main gearbox (6)
„
Check if the packer coupling is engaged, refer to page 331 .
„
Check if the Variable Filling System (VFS) is in zero position, refer to page 335 .
„ Move packer strip (11) into position, refer to page 332 .
„
Move plunger into position, refer to page 333 .
22.15.1 Checking packer coupling
Only for “open packer” version
BP000-222
ü
The machine is shut down and safeguarded, refer to page 27 .
The packer coupling is correctly engaged when the outer markings (2) on the packer coupling
correspond to the marking (1) on the cone of the packer coupling.