manualshive.com logo in svg

Krone Big Pack 1270, Original Operating Instructions, Page: 332 / 440

Share
Download
Krone Big Pack 1270 Original Operating Instructions Download Page 332

22

Repairs, maintenance and settings by technicians

22.15 Setting packer relative to plunger

332

BiG Pack 1270

Original Operating Instructions 150000747_02_en

22.15.2

Positioning the packer strip

BPG000-045

ü

The machine is shut down and safeguarded, 

refer to page 27

.

„

Release flywheel brake, 

refer to page 92

.

„

Turn the flywheel manually in working direction until the large roll of the packer strip (3)
running in front of the feeder strip (2) appears in the inspection window (1).

„

Keep turning the flywheel until the dimension is 

X=30-60 mm

 between the large roll of the

packer strip (3) and underneath the inspection window.

„

Secure the packer in this position with a mounting lever.

„

Apply flywheel brake

refer to page 92

.

Summary of Contents for Big Pack 1270

























































































































































































































































































































































































































































Reviews:

No comments