KRONAsteel JESSICA, Application Sheet

Page: 9 / 28

7
EN Application sheet EN Application sheet
KITCHEN HOODS
GER Gebrauchs- und Wartungsanweisung
This product is marked in accordance with the European
Directive 2002/96/EU on waste electrical and electronic
equipment (WEEE).
By ensuring correct disposal of this product, you will help
to prevent potential negative consequences for the envi-
ronment and human health.
The symbol on the product or in the supporting docu-
mentation specifies that you cannot treat this product
as common household waste during disposal. Instead, it
should be taken to the relevant waste electric and elec-
tronic equipment station for further disposal.
Scrapping should comply with the local waste disposal
rules.
Contact the local authorities, waste disposal service or the
shop where you bought the product for more detailed in-
formation about the rules of such products treatment, dis-
posal and processing.
SETS*
1. Kitchen hood body – 1.
2. Flange with non-return valve 120 mm – 1.
3. Set of fasteners for hood wall mounting – 1.
4. Operating instructions – 1
5. Charcoal lfilter – 2.
* The sets can be changed by manufacture without notice.
TECHNICAL DATA
MODEL: JESSICA (EU) PB JESSICA (EU) S
Overall dimensions, mm:
Width 600 600
Length (depth) 480
Height (min-max) 82
Outlet opening diameter, mm 120
Electric line voltage / Frequency 220-240 V / 50 Hz
Power consumption, W:
Motor 80
Lighting lamps 2 x 1.5, LED
Number of ventilation rates 3
Timer no yes, 1–9 min.
Control type push button sensor
Weight (net weight), kg 5.5 6.0
Energy efficiency class D
For the User
ATTENTION! Install and operate the device in
accordance with the Instructions.
Important notes
This kitchen hood is to be used by households
only. Use for other conditions is inadmissible,
and warranty does not cover such cases.
Before installation and film removal, make sure
that the kitchen hood functions in all working
modes (See the Kitchen Hood Installation sec-
tion).
All works related to installation, connection and
repairs should only be performed by qualified
technicians specializing in the product.
The manufacturer is not liable for any failures
and breakdowns that are related to wrong instal-
lation, connection and repair.