41
Refitting the fabric
Carrycot
Do as stated below:
Remove the frame struts from the frame by turning them to become parallel with
the frame, move them gently inwards.
Figure A
.
Fit the strut covers and the nylon eyelets, and then refit the struts to the frame.
Place the frame down into the carrycot fabric. The central nylon tape should be on
the upper surface of the frame.
Figure B
.
Fold both frame struts upwards and insert the bottom plate into the carrycot fabric.
All three nylon tapes should lie under the bottom plate.
Figure C
.
Make sure that the bottom plate is the right way round by ensuring that the plastic
attachments on the lower surface match the holes in the carrycot fabric.
Fit the plastic attachments to the holes on the lower surface of the carrycot fabric and close the zip.
Make the two rear attachments accessible by drawing the fabric well away from them.
Figure D
.
Mount the head protection in the pocket at the head end and close the zip.
Fold the frame struts back such that the plate is positioned at the bottom and the
frame at the top of the fabric.
1
2
3
4
5
6
7
8
9
Pull the struts towards the foot end and the head end until they become attached at
their attachment points.
Figure E
.
Mount the hood and attach it to the carrycot.
Figure F
.
Place the mattress in the carrycot.
Figure G
.
10
11
12
Summary of Contents for Syskon Carrycot
