User's Guide
Power Transducer
Review I
KRON Instrumentos Elétricos
18
5. Output connection
Depending of the transducer model, it makes available one or two analog
outputs (WA and RA – 1 output, WR – 2 outputs) used for measuring the power of the
system where the transducer is connected.
More detail on how this output should be interpreted and also on how the choice
for voltage and/or current output types should be made are explained in the chapter
Analog Output
.
The choice of cable section to be used should consider information such as the
distance between the transducer and the equipment that will receive the signal and the
current level and/or voltage to be used.
Voltage type outputs (e.g.: 10Vdc) should never suffer short circuits. There is
no problem in keeping current type (e.g: 4-20mAdc) outputs opened.
