•
If you suspect that anything is wrong with the product at any time, stop
using it immediately, turn OFF the power supply, and consult with your
Kromek representative.
•
If the battery is observed to swell in size, become excessively hot, or have
very low capacity, then disconnect power, remove the device to an isolated
safe place until battery replacement can be done by an authorised
maintenance technician.
•
When disposing of the product, dispose of it as industrial waste.
•
Observe all other precautionary information provided in this manual.
3.2 Precautions for Correct Use
Please observe the following precautions to prevent failure to operate,
malfunctions, or undesirable effects on product performance.
3.2.1
Installation Location
Do not install the product in the following locations:
•
Locations subject to corrosive gases, dust, dirt, metal powder, or
salt.
•
Locations where the specified ambient operating temperature is
exceeded.
•
Locations subject to extreme temperature changes that may result
in condensation.
•
Locations where the specified ambient operating humidity range is
exceeded.
•
Locations where the product would be directly subjected to
vibration or shock exceeding specifications.
•
Locations in direct sunlight should be avoided.
•
Locations in easy reach of the general public should be avoided.
•
Locations subject to submersion in water, oil, or other liquids.
3.2.2
Installation
•
Wireless communication can have a carrier frequency between
1900 and 2100 MHz depending on service provider, if there are
multiple transmitters at this frequency range nearby then
connectivity may be impaired.
•
For electrical safety, follow all instructions in the Installation section
of this manual.
