MAL-OPS-0927 Revision 4.0 Page 26 of 52
6.2.3 Power Cycling
Power off both the D3S and the smartphone
and wait for at least 5 seconds before
powering them back up.
Click the D3S ID app icon on the
smartphone to open the D3S ID application.
The D3S detector indicator light should turn
blue after ~10 seconds indicating Bluetooth
connection has been established.
The D3S status at the bottom right hand
side should now be connected, indicated by
the tick mark. Gamma and neutron dose
rate should now be displayed.
If not, repeat this process once more.
6.2.4 Un-Pairing
From the smartphone home screen, open
the
‘Settings’
application,
go
to
‘Connections’ and select ‘Bluetooth’ to
access the Bluetooth menu.
Under ‘Paired devices’ click the settings
cog icon to the right of the corresponding
D3S serial number then select ‘Unpair’.
The D3S indicator light should now be
yellow, pulsing every 5 seconds.