KROMA
TELECOM
PROFESSIONAL
MONITORS BM5414/20
BM5414/20
18
Once selected one of the options the symbols (_ _ _) located in the right
hand of the lower part of the screen going to indicate the value of the state
of the variable. If the CAL key is pressed again then will be stored the last
current value, the dashed lines appear again and one may select another
variable.
By the other hand, if ESC key is also pressed, will store the modified value
of the variable but it will return to the previous menu.
6.4.2. OPTION: MENU CALIBRATION VALUES
In this menu we could modify the associate parameters to the primary
controls of the monitor.
The menu from wich one we could modify the parameters is the following:
GRAY SCALES MENU
BLCK
SAT
CNTR HUE
VOL
APT
- - -
Figure 8
The operation is the same as in the previous case, the dashed lines, of the
right hand in lower part of screen, when pressing CAL, they will give the
values of the variable. However, there are parameters with some
particularities that are kept in mind:
1.
The Saturation (SAT):
The monitor detects if you are viewing a NTSC
system signal, in whose case will modify the associate parameter to this
system. In any other case always modifies the other parameter. But anyway
both parameters represent the saturation.
2.
The Volume
(VOL): Although functions exist associated to the VOL key,
the system of control won't give you access to this variable, except for the
monitor carries incorporate the audio option.
3.
The Hue Option
: It will only has access, if the active input signal is
NTSC.
4.
The Aperture (APT):
it will only give access to modify their value if the
monitor incorporates the option.
