2
INSTALLATION
6
WATERFLUX 3000
www.krohne.com
02/2012 - 7311212500 - QS WATERFLUX 3000 R05 en
2.4 Storage
•
Store the device in a dry and dust-free location.
•
Avoid lasting direct exposure to the sun.
•
Store the device in its original packaging.
•
Storage temperature: -50 ...+70
°
C / -58...+158
°
F
2.5 Transport
•
Do not lift the device by the signal converter housing.
•
Do not use lifting chains.
•
To transport flange devices, use lifting straps. Wrap these around both process connections.
2.6 Pre-installation requirements
Make sure that you have all necessary tools available:
•
Allen key (4 mm)
•
Small screwdriver
•
Wrench for cable glands
•
Wrench for wall mounting bracket (remote version only)
•
Torque wrench for installing flowmeter in pipeline
2.7 Installation conditions
2.7.1 General requirements
Figure 2-2: Transport
INFORMATION!
The following precautions must be taken to ensure reliable installation.
•
Make sure that there is adequate space to the sides.
•
Protect the signal converter from direct sunlight and install a sun shade if necessary.
•
Signal converters installed in control cabinets require adequate cooling, e.g. by fan or heat
exchanger.
•
Do not expose the signal converter to intense vibration. The flowmeters are tested for a
vibration level in accordance with IEC 68-2-64.
