TECHNICAL DATA
2
9
OPTIWAVE 6300 C
www.krohne.com
04/2011 - 4000305604 - TD OPTIWAVE 6300 R04 en
Installation conditions
Process connection size
The nominal diameter (DN) should be equal to or larger than the antenna diameter.
If the nominal diameter (DN) is smaller than the antenna, either:
- provide the means to adapt the device to a larger process connection on the silo
(for example, a plate with a slot), or
- use the same process connection, but remove the antenna from the device before
installation and fit it from inside the silo
Process connection position
Make sure that there are not any obstructions directly below the process
connection for the device.
Dimensions and weights
Refer to "Technical data: Dimensions and weights".
Materials
Housing
Standard: Aluminium with a polyester topcoat
Option: Stainless steel (1.4404 / 316L)
Wetted parts, including antenna
Horn / Sheet metal horn antenna: Stainless steel (1.4404 / 316L)
Drop antenna: PTFE; PP - a PP or PTFE flange plate protection option is also
available
Process connection
Stainless steel (1.4404 / 316L) - a PP or PTFE flange plate protection option is also
available for the Drop antenna
Gaskets (and o-rings for the
sealed antenna extension option)
PTFE Drop antenna:
PTFE Drop antenna:
PTFE Drop antenna:
PTFE Drop antenna:
FKM/FPM (-40
…
+150
°
C / -40
…
+300
°
F); Kalrez
®
6375 (-20
…
+150
°
C / -4
…
+300
°
F);
EPDM (-50
°
C
…
+150
°
C / -58
…
+300
°
F)
1
PP Drop antenna:
PP Drop antenna:
PP Drop antenna:
PP Drop antenna:
FKM/FPM (-40
…
+100
°
C / -40
…
+210
°
F); Kalrez
®
6375 (-20
…
+100
°
C / -4
…
+210
°
F);
EPDM (-40
°
C
…
+100
°
C / -40
…
+210
°
F)
1
Horn / Sheet metal horn antenna:
Horn / Sheet metal horn antenna:
Horn / Sheet metal horn antenna:
Horn / Sheet metal horn antenna:
FKM/FPM (-40
…
+200
°
C / -40
…
+390
°
F); Kalrez
®
6375 (-20
…
+200
°
C / -4
…
+390
°
F);
EPDM (-50
°
C
…
+150
°
C / -58
…
+300
°
F)
1
Feedthrough
Standard: PEI (-50...+200
°
C / -58...+390
°
F - max. range. The feedthrough
temperature limits must agree with the temperature limits of the gasket material
and antenna type. If the distance piece option is not attached, the maximum
temperature is 150
°
C / 300
°
F.)
Option: Metaglas
®
(-30...+200
°
C / -22...+390
°
F - max. range. The feedthrough
temperature limits must agree with the temperature limits of the gasket material
and antenna type. If the distance piece option is not attached, the maximum
temperature is 150
°
C / 300
°
F.)
2
Weather protection (Option)
Stainless steel (1.4301 / 304)
Process connections
Thread
G 1
½
; 1
½
NPT
Flange version
Flange version
Flange version
Flange version
EN
DN80
…
150 in PN16 or PN40; others on request
ASME
3
¨…
8
¨
in 150 lb, 3
¨
...4
¨
in 300 lb; others on request
JIS
80
…
100A in 10K; others on request
Other
Others on request
