KROHNE OPTISWITCH 3100, Handbook

Page: 8 / 16

8
5 Setup
Electronics module • OPTISWITCH 3100 C - 3300 C
30204-EN-210907
5 Setup
5.1 Setup
When replacing the electronics module, make sure that all adjustment
elements are set to the settings of the old electronics module. Hence
the sensor is immediately ready for operation.
In general, all oscillators of series WE60 can be interchanged.
If you want to use an electronics module with a completely different
signal output, you have to carry out the complete setup.
The necessary, suitable operating instructions manual can be down-
loaded from our homepage under Downloads.
The adjustment should be carried out according to the description in
the operating instructions manual.
Setup