1
2
3
1 2
3 4
5
4
11/2021 - 4008317002 - OPTISONIC 6300 F/W R02 en
3
4
120 °
General installation of the rails
Greasing the transducer surfaces
2 Installation
Installation position
Change the position of the transducer
General configuration instructions
Pump, control valve - open feed / discharge
Check the manual for more details on installation options
(e.g. Large version installation or applying solid pads)
Go through menu X1...X5
Enter the values for the installation menu,
X1...X7.2.8
Read the advised mounting distance in menu
X7.2.3
The advised distance (menu X7.2.3)
must be > 246 mm / 9.7" for V-mode
Check the manual for more details on installation options
Choose the applicable measuring
mode
Repeat if necessary.
Adjust settings in menu
X5 / X7 and finish with X7.2.9…7.2.11
Follow up with menu X7.2.4…X7.2.8
Run the optimization loop
Choose sensor size
Go through menu X1...X5
