5
SERVICE
24
MS15 - MS40 SERIES
www.krohne.com
06/2020 - 4007717401 - AD ATEX MS15-MS40 R01 en
5.3.2 Replacement of the old version of the MS15
You can replace the old version of the MS15 limit switch that agrees with EC-Type Examination
Certificate INERIS 02ATEX0088 X. You can find the ATEX certification number on the device
nameplate.
If you must replace this limit switch, send an order for the new version of the MS15 series with
the applicable Ex approval. Record the serial number of the limit switch that you will replace and
send this data to your supplier.
Refer to the installation procedures in the handbook.
Refer to the installation procedures in the handbook. The technical data (temperature, voltage
etc.) given in these supplementary instructions agrees with the new version of the MS15 series
limit switch. Make sure that you also obey the limits of the process temperature for the bypass
level indicator given in EC-Type Examination Certificate INERIS 02ATEX0088 X (BM26A - old
version).
5.3.3 Replacement of the old version of the MS40
You can replace the old version of the MS40 limit switch that agrees with EU-Type Examination
Certificate INERIS 08ATEX0045 X. You can find the ATEX certification number on the device
nameplate.
If you must replace this limit switch, send an order for the new version of the MS40 series.
Record the serial number of the limit switch that you will replace and send this data to your
supplier.
Refer to the installation procedures in the handbook. The technical data (temperature, voltage
etc.) given in these supplementary instructions agrees with the new version of the MS40 series
limit switch. Make sure that you obey the limits of the process temperature for the bypass level
indcator given in EC-Type Examination Certificate INERIS 02ATEX0088 X (BM26A - old version) or
EU-Type Examination Certificate INERIS 08ATEX0044 X (BM26 Basic / Advanced).
5.3.4 Replacement of the new version of the MS15 series or MS40 series limit switch
If you must replace the new version of the MS15 series or MS40 series limit switch, send an
order for the device with the applicable Ex approval. Record the serial number of the limit switch
that you will replace and send this data to your supplier.
Refer to the installation procedures in the handbook.
DANGER!
Devices with an Ex i approval:
Devices with an Ex i approval:
Devices with an Ex i approval:
Devices with an Ex i approval: Make sure that you use an intrinsically-safe barrier and electrical
wires with the correct parameters. This data is given on the device nameplate of the new version
of the MS15 series limit switch.
DANGER!
Make sure that you use an intrinsically-safe barrier and electrical wires with the correct
parameters. This data is given on the device nameplate of the new version of the MS40 series
limit switch.
