10
Important:
The measuring axis
must be in vertical
position to the
measuring
surface!
Determination of the
minimum measuring value
via pivoting
the gage (optimal measurement).
Measured value
Measured value
Measured value
too high
correct
too high
Important:
The measuring axis
must be in vertical
position to the
measuring surface!
Determination
of the
maximum measuring value
for measurement
of narrow grooves via lateral displacement of the gage, where the
gage cannot be pivoted vertically.
Measured value
Measured value
Measured value
too small
correct
too small
For checking round parts it is advisable to use measuring gages with
chisel contacts (
Technical Data)!
Important:
The fixed flat contact
must be square against
the part to be measured!
Measurement of flat material (e.g. foamed material) with flat measuring
contacts.
The movable flat contact aligns optimally so a pivoting or moving of the
gage is not necessary.
Handling during measurement
Movable flat
contact
Fixed flat
contact
