6
– Measuring range
– Resolution
– Accuracy
– Max. length of connecting cable
0-20 mA
0.1 mA
2.5% of measuring range final value
30 m
Phase monitoring
– Operation with frequency converter
– Measuring range, phase-phase
– Operating frequency range
– Typ. operating frequency
– Min. detection time
– Monitoring runs
Suitable
3 AC 20-100 Hz 100-690 V ±10%
1-16 kHz
8 kHz
100 ms
Phase sequence, phase failure, phase asymmetry,
undervoltage and overvoltage
Switching frequency monitoring
Switches per time unit, configurable
Switch-off limits, general
Configurable if not specified
Restart delay
Configurable
Reset of lock or restart delay
Network reset >5 s only possible once any faults
have been rectified
Relay
– Contact
– Mechanical service life
AC 240 V 2.5 A C300 min. AC/DC 24 V 20 mA
Approx. 1 million cycles
Interface
Diagnostics port (DP)
Degree of protection as per EN 60529
IP20
Connection type
Tension spring connection (PUSH IN) 0.2-2.5 mm2
Housing material
PA 66 GF 30
Fixing
Control cabinet housing (basic grid 45 mm),
clippable on to 35 mm standard rail as per
EN 60715
Dimensions
See dimensions in mm
Weight
Approx. 300 g
Test regulations
EN 61000-6-2, EN 61000-6-3 EN 61010-1
Overvoltage category III (pay attention to
temperature sensor insulation)
Degree of pollution 2
Approval
UL File No. E473026 cURus
4.3
Dimensional drawing