2. Use preinstalled rubber stands to make sure that the machine is standing secure on the ground.
3. Remove the package wrapping from the machine.
4. Adjust rubber stands to make sure that the machine is level.
5. If the machine is cold, open machines back door and wait about 30 minutes for the electronics to
warm up.
6. Connect the power cord to power outlet and check if machine is working.
Volume adjustment
1. Turn ON the machine and wait for normal operation mode.
2. Open back door and locate main board.
3. Insert credits or set the machine to Free Play Mode (described in Settings section).
4. Use S2 and S3 buttons on the main board to adjust volume.
Fitting prizes on the prize bars
1. Make sure that the machine is OFF.
2. Open prize door.
3. Remove prize locking pin.
Notice
: In order to remove the prize locking pin, you have to unscrew it clockwise.
4. Load the prize bar with prizes.
Notice
: Make sure that the hanging ties are attached securely. Remember to leave 3-finger gap in the
hanging tie.
Caution
: Make sure that prizes are not bigger than described in Machine description and technical
specification section. Bigger prizes could block the machine.
Notice
: Make sure that prizes are placed apart on the bar.
5. Reinsert the locking pin.
Caution
: Make sure that the locking pin is placed above hanging ties.
6. Close the door
8
