Krick 20360, Building Instructions

Page: 23 / 26

Stand Juli 2014
Seite 23 ©
Krick Modelltechnik Knittlingen
133 Pump Not included Accessory 65150 1
134 Silicon tube Finished part 5 x 3 x 500 mm 1
135 Bollard Support Dowel 8 x 25 mm 2
136 Bollard bar Dowel 4 x 63 mm 1
137 Bollard cap Plywood Laser sheet (5) 1,5 mm 2
138 Bollard base Plywood Laser sheet (5) 1,5 mm 1
139 Bollard Plywood Laser sheet (5) 1,5 mm 1
140 Stanchion Plywood Laser sheet (5) 1,5 mm 22
141 Upper rail wire Brasswire 1,5 mm 4
142 Lower rail wire Brasswire 1 mm 4
143 Nameplate Plywood Laser sheet (5) 1,5 mm 2
144 Flagg mast Finished part Plastic 1
146 Lamp base scuare Plywood Laser sheet (5) 1,5 mm 5
147 Lamp glass Plexi 7
148 Lamp top Plywood Laser sheet (5) 1,5 mm 8
149 GPS
149.1 GPS Plywood Laser sheet (5) 1,5 mm 1
149.2 GPS Plywood Laser sheet (3) 3 mm 4
149.3 GPS Plywood Laser sheet 1.5 mm 1
149.4 GPS Plywood Laser sheet 1.5 mm 1
149.5 GPS Plywood Laser sheet 1.5 mm 1
150 Hatch Plywood Laser sheet (3) 3 mm 1
151 Hinge Brass tube 2 x 10 mm 2
152 Handle Brass 1,5 x 20 mm 2
153 Lamp base round Plywood Laser sheet (5) 1,5 mm 3
154 Lamp glass blue Plexi 6 x 6 mm 1
155 Lamp base Brass 3 x 10 mm 1
156 Ventilator Plastic Finished part 2
157 Flagg Cloth Finished part 1
158 Flagg cord Yarn 0,5 mm 1
159 Water intake Brass tube 4 x 3 x 25 mm 1
160 Rudder blade outer Plywood Laser sheet (6) 1,5 mm 2
161 Rudder blade inner front Plywood Laser sheet (6) 1,5 mm 2
162 Rudder blade inner rear Plywood Laser sheet (6) 1,5 mm 2
163 Rudder shaft Brass 3 x 85 mm 1
164 Emblem Sticker 2
165 Name letters Sticker 1