Stand Juli 2014
Seite 10
©
Krick Modelltechnik Knittlingen
the bottom. At all the cable entrance places
you can file out curves with a round file and
drill the holes open later, when needed.
For the Radar file out the opening 12 mm be-
hind the upper front edge of the mast base or
drill a 4 mm hole later.
Now the two halves can be glued together.
With a 90deg square check that the mast
stands vertically.
Drill two 2mm holes at both ends of the mast
yard (45) fort he antenna base (46).
Fit the yard into the mast, both ends equal.
Now fix the yard into the mast with superglue
and both antenna bases into the yard. After the
glue is dry the yard ends can be carefully bent
to the rear.
The last step is to glue the lamp board and the
mast top onto the mast. Take car that the hole
of the plate and the mast opening are at the
same place.
Now the mast can be sanded and glued to the
roof.
drill
