Seite 4 © Krick Modelltechnik, Germany, June 2015
Fix the roof to the cabin. When dry cut out
the roof as marked and also remove the
centre spar. Paint the cabin, inside and
out to your chosen colour scheme.
Drill the roof for the hand rail supports 54
fix these in position allowing a 2 mm gap
from the roof. Fit and glue the hand rail
55.
15. Parts 56 to 59. Fit, in position the
ships wheel and support screw the wheel
to the support with screw no 59
16. Parts 60 to 65. Construct the bridge
as shown on the main drawing and
drawing 10. Leave the bridge in a natural,
wood finish. Paint the roof to match the
Cabin roof.
17. Part 66. Glaze the main cabin and
the bridge using the supplied template.
(Glue with PVA wood glue).
