• Insert the plug into the socket, and then turn the temperature control knob to the
“high heat” marking. The pilot light will come on, indicating that the iron is heating
up.
• When the pilot light turns off, the set temperature has been reached and the iron
is ready to use.
• During ironing, the pilot light on the iron automatically switches on/off as the
thermostat maintains the set temperature (you may continue ironing during this
process).
• Turn the steam control knob to the required position.
• Steam is produced as soon as the iron is held horizontally.
BURST OF STEAM
Press the burst of steam button to generate a powerful burst of steam that can pene-
trate the fabrics and smooth the most difficult and tough creases. Wait for 5 few sec-
onds before pressing again.
DRY IRONING
For ironing without steam, follow the instruction in section steam ironing, however, the
steam control turning knob should remain in position ”O” (no steam).
3. MAINTENANCE & CLEANING
• After using, lift the iron with the filling hole downwards to empty the remaining
water from the Water tank.
• Insert the plug into the socket, and set the temperature control knob to ”MAX” for
1-2 minutes to evaporate the remaining water, and then unplug the iron and let it
cool down before storing it.
• Wipe off the soleplate with a damp cloth and a non-abrasive (liquid) cleaner.
• If the fiber is adhered to the soleplate, use a damp cloth with vinegar to wipe off
the soleplate.
• Never use strong acid or alkali in order to avoid damaging the soleplate.
