9
EN
TROUBLE SHOOTING
The following table gives checks and actions that you can perform if your machine does not operate correctly.
If these do not identify/solve the problem, contact Kress Customer Service.
I would add a comment here to again recommend that you apply grease to the shank of every drill bit used.
Symptom
Possible Cause
Remedy
Machine fails to
operate
No power supply to machine.
Use another socket.
The brushes are worn out.
Have a qualified person to check them,
and replace them if necessary.
The power and
hammer efficiency of
the machine is low.
Machine may be cold.
Warm up the machine for 1-2 minutes until
it reaches a proper working temperature.
The connecting rod is broken (lacking of
grease oil or the gearbox is dirty).
Have a qualified person to replace it if
necessary and add grease oil.
There is no enough grease oil in the
gearbox.
Have a qualified person to add some
grease oil (about 2 or 3 bottle caps).
Your bit does not slide freely in the
chuck.
Clean the dust and debris inside the
chuck; Grease the shank of the bit if
necessary.
Your drill bit will not fit
into the chuck easily
The chuck is dirty with dust and debris.
Clean the dust and debris from inside the
chuck.
The shank of the bit is damaged or
distorted.
Change a new bit.
A drill bit has broken and the shank has
remained in the chuck.
Have a qualified person to check and
replace it if necessary.
You cannot remove
your drill bit from the
chuck
The shank of the bit is damaged or
distorted;
The chuck is dirty with dust and debris.
Have a qualified person to check and
replace it if necessary.
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description
Electric hammer
Type
KUX15P (X15P-designation of machinery,
representative of hammer)
Function
Hammering various materials
Complies with the following Directives,
2006/42/EC,
2011/65/EU&(EU)2015/863,
2014/30/EU
Standards conform to:
EN 60745-1,
EN 60745-2-6,
EN 55014-1,
EN 55014-2,
EN 61000-3-2,
EN 61000-3-3
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH Grüner Weg
10, 50825 Cologne, Germany
2020/05/25
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China