Krendl GV230 Owner'S Manual Download Page 5

Rev. Date: 12/20/21

Page 2

General Safety

• Read this manual carefully and become familiar with your equipment.  Know its applications, limitations, and any

operational hazards.

• This equipment was designed and manufactured for specific applications.  Do not attempt to modify the unit or utilize

it for any application in which it was not intended.  If you have any questions about your intended use or the machines

suitability, ask your supplier/distributor or consult the factory.  Krendl Machine Company can not anticipate every

circumstance that might involve a hazard.  For that reason, warnings in the manual and warning tags and decals affixed

to the unit, are 

not

 all-inclusive.  Do not handle, operate, or service the unit by a procedure or method not specifically

recommended by the manufacturer.

Electrical Safety

The 

National Electric Code

 

(NEC) in the United States and many international electrical codes require frame

and external electrically conductive parts of this machine to be properly connected to an approved  earth ground.

Local electrical codes may also require proper grounding of machine.  Consult with local electricians for grounding

requirements in your area.

• Take care and follow these instructions when removing or installing the battery or electrical burn could occur.  When

removing battery, disconnect positive cable first followed by negative cable.  When installing battery, connect negative

cable first followed by positive cable.

• Reference NFPA 79, 70E, or OSHA safe work practices when performing energized work procedures.

Safety/Caution

   

• Be Safe

 -

ALWAYS 

remove key from ignition and disconnect red positive battery cable before performing any

maintenace or service to vacuum.

• 

Be Safe

  - Keep hands, loose clothing, jewelry and hair away from moving parts.

• 

Be Safe 

- Make sure all guards are in proper place 

before

 operating vacuum.  Guards and safety devices/switches

should not be removed, modified or by-passed.

• 

Be Safe 

- Do not remove safety pins located in output tube, as injury may result.

• 

Be Safe 

- Do not remove fan chamber cover when key is in the 

on

 position.

• 

Be Safe 

- Keep work area clear of debris.  Do not use vacuum to move stones, nails, or any other foreign debris.

• 

Be Safe -

Consult a qualified technician to answer questions 

before

 attempting to service unit, as injury may result.

• 

Be Safe

  - Wear proper safety equipment, including protective gear, such as respirators, eye and ear protection.

• 

Be Safe 

- Use proper and secure clamping method for all insulation hoses to prevent uncontrolled stream bursts

around operator.

• 

Be Safe

 - Do not operate machine alone.

• 

Be Safe

  - Do not leave machine unattended and energized.

• 

Be Safe

  - Turn machine off and disconnect battery before clearing jam or attempting to remove any object in the fan

chamber.

• 

Be Safe

  - Use proper lifting when moving insulation and loading machine.

• 

Be Safe

  - Violation of the Owner's Manual or safety precautions may void warranty.

Summary of Contents for GV230























Reviews: