Rev. Date: 3/14/18
Page 3
MODEL #500
Safety/Caution
•
Be Safe
- Keep away from moving parts.
•
Be Safe
- Make sure all guards and hopper bar are in proper place
before
operating machine. Guards
and safety devices/switches should not be removed, modified or by-passed. Hands should
never
pass below hopper bar.
•
Be Safe
- Do not remove motors or lift hopper when unit is connected to power supply.
•
Be Safe
- Make sure machine is properly grounded. Protect all electrical supply cords from sharp
objects, moisture, and other potentially hazardous materials. Keep power cords in good
repair. Electrical service must be performed by a qualified electrician.
•
Be Safe
- Disconnect power supply
before
inspecting or adjusting unit.
•
Be Safe -
Consult a qualified technician to answer questions
before
attempting to operate, or injury may
result.
•
Be Safe
- Do not operate machine alone.
•
Be Safe
- Do not leave machine unattended and energized.
•
Be Safe
- Turn machine off and disconnect electricity before clearing and feeding jam or attempting to
remove any object dropped in the hopper.
•
Be Safe
- Keep hands, loose clothing, jewelry and hair away from agitators, gears, chains and other
moving parts.
•
Be Safe
- Use proper lifting when moving fibers and loading machine.
•
Be Safe
- Keep work area clear of debris.
•
Be Safe
- Wear proper safety equipment, including protective gear, such as respirators, eye and ear
protection.
•
Be Safe
- Violation of the Owner's Manual or safety precautions may void warranty.
Make Sure!
• Hopper is empty of foreign objects
before
starting.
• Adequate electrical power is supplied or damage to unit will result.
• Blower filter is kept clean and in place when blower is on.
• Machine is turned off
immediately
if hose is plugged, or blower will overheat.
• Machine must be on
before
adding fiber.
• Blower(s) must be on, when agitators are running, or machine will bind.
• Agitator motor is not run with hopper empty for more than a few minutes, or damage to seals will result.
• Sprockets, chains, belts and pulleys are correctly
aligned
and
tensioned
.
• Pieces of bag are
not
left in the machine as this can bind and stall your machine.
• This machine should only be used with good quality fibers that are dry, undamaged and that meet a certain
industry specification or quality standards.
Summary of Contents for 500
