KREMLIN
Page 2
Manual : 573.001.212
Dear Customer,
We thank you very much for purchasing our KREMLIN pump. You are the owner of one of the most
reliable pumping system available on the market.
To make sure your investment will provide full satisfaction, special care has been taken by
KREMLIN during all designing and manufacturing processes.
To obtain the best result, safe and efficient operation of your equipment, we advice you to read and
make yourself familiar with this instruction and service manual. Indeed, the non-compliance with
instructions and precautions stated in this manual could reduce the equipment working life, result in
operating trouble and create unsafe conditions.
1. EC DECLARATION OF CONFORMITY
The manufacturer :
KREMLIN REXSON
with assets of 6 720 000 euros
Head office : 150, avenue de Stalingrad - 93 245 - STAINS CEDEX - FRANCE
Tel. 33 (0)1 49 40 25 25 - Fax : 33 (0)1 48 26 07 16
Herewith declares that : Pneumatic pump, is in conformity with the provisions of :
EC - Machinery Directive (Directive 98/37/EC) as amended and with national implementing legislation
Ex - ATEX Directive (Directive 94/9/EC) :
II 2 G (group II, class 2, gas).
Established in Stains, on March 1st 2003,
Daniel TRAGUS
President
2. GENERAL SAFETY INSTRUCTIONS
WARNING : Any misuse of the equipment or accessories can damage them, result in serious
body injury, fire or explosion hazard and reduce the equipment working life. Read,
understand and comply with the safety instructions hereafter.
The personnel involved in operating and servicing this equipment must be aware of all safety
requirements stated in this manual. The workshop supervisor must be certain that the personnel has
perfectly understood the safety instructions and complies with them.
Read all instruction manuals as well as the tags of the equipments before operating the equipment.
Refer to local safety instructions and comply with them.
INSTALLATION REQUIREMENTS
Â
Ground the equipments.
Use the equipment only in a well-ventilated area to prevent from serious body injuries, fire and
explosion hazards. Do not smoke in the spray area.
Never stock paints and solvents in the spray area. Always close the pots and the tins.
Always keep the spray area clean and free from debris (solvent, rags,…).
Read paint and solvent manufacturer's technical instructions.
Spraying of some materials may result in hazardous working conditions. To protect the operator,
respirator mask, hand cream and glasses are required. (Refer to chapter "Safety equipment" of
KREMLIN selection guide).