KREMLIN REXSON
Page 22
Manual : 573.199.112
FLUSHING (F2)
This menu is used for flushing. When you want to flush the machine, activate
OK
when you are on
the F2 menu.
After confirming via
OK
, the machine opens the solvent valve. The buzzer sounds intermittently.
Check the solvent pump supply valve is open.
A countdown begins : F2-9, then F2-8.
The machine stops when the countdown is over.
The machine closes the solvent valve and the mixed material flushing has ended.
Nota : Close the spraying air valve during the 'FLUSHING' stage.
During the first flushing, you can determine the solvent volume (F3 P12 parameter) consumed
during the flushing time (F3 P11 parameter). Once determined, enter your parameters
accordingly..
CONSUMPTIONS / PRINT (F4)
The 'F-4' menu enables to view the consumptions of each material (color, catalyst in cc). You can also
print the ratio of the consumptions as well as the parameters of the applications : you must connect a
connection cable to the printer (RS 232 connection) (printer not provided).
Consumption of the base
Consumption of the VOC
Consumption of the catalyst
Enables
the
user
to
reset
the
consumptions activating the key
OK
thanks to a sub menu
Consumption of solvent
Enables
the
user
to
the
consumptions
and
the
parameters
activating the key
OK
