KREMLIN REXSON
- 8 -
N° 578.212.110-UK-1506
COUPLING PROCEDURE
Change all the seals (16 and 28) and lubricate them.
Clean the threading of the coupling rod (8) and the tapping of the pump piston (29).
Slide down the motor rod (see previous §).
Apply a light coating of glue to the threading of the motor rod (Loctite 222).
Present piston-fluid section-discharge flange assembly.
Screw the motor rod into the fluid section piston. Lock the assembly.
Apply a light coating of glue to the fluid section piston threading (Loctite 577).
Pull the skirt (10) downwards, and screw it onto the fluid section piston (29).
(tool : with a 36mm wrench).
Remount the coupling rod (19) if it has been removed.
Replace the suction flange (20).
Screw the 3 screws (15).
Reinstall the 3 washers (21) and screw the nuts (22).
Remount the pump lower part as explained previously (cylinder, suction,…).
Detail of the skirt (10)
assembly (29) on the piston
