Back Panel Description
See Figure 2 on page 7
8
Krell Showcase Amplifier
The Showcase Amplifier back panel provides connections for all
inputs and outputs, remote connection input and output links, and
the AC power supply.
4 Inputs 1-7
The Showcase Amplifier has seven channel inputs for output
devices with balanced XLR connectors.
5 Inputs 1-7
The Showcase Amplifier has seven channel inputs for output
devices with single-ended RCA connectors.
Use only one input to each amplifier channel at a time. You may use
the balanced inputs for some of the amplifier channels and the
single-ended inputs for the remaining channels.
6 Outputs 1-7
The Showcase Amplifier has seven amplifier channel outputs. The
loudspeaker binding post terminals accept spade lugs, bare wire, or
pins. Use the red terminal for the positive connection and the black
terminal for the negative connection.
BALANCED INPUTS
SINGLE-ENDED
INPUTS
AMPLIFIER CHANNEL
OUTPUTS
BACK PANEL REMOTE
CONNECTIONS
Tighten loudspeaker binding posts by hand only.
7 12 VDC Remote Power Out
The Showcase Amplifier is equipped with an output that sends 12
VDC power on/off (12 V trigger) signals to other Krell components
and other devices that incorporate a 12 V trigger.
When the component is in the operational mode, the 12 VDC Out pro-
vides 12 V of DC output. When the component is in the stand-by mode or
off, the DC output is 0 V.
12 VDC Out (12 V trigger) current is limited to 30 mA.
IMPORTANT
Notes
IMPORTANT
