52
Krell S–1000
System Configuration,
continued
Step 4, Operation
Program Remote,
continued
1. Rotate the knob (26) on the front panel to select a command.
The command appears on the front panel display window (20).
2. Place the programmable remote in program mode (see the learn-
ing remote user manual).
3. Place the infrared sensor of the programmable remote so that it
faces the infrared emitter (4) on the S–1000 front panel.
4. Press and hold the save button (25) on the S–1000 front panel
until the programmable remote has learned the code (see the
learning remote user manual for information on the time needed
to learn the code).
5. Select and save as many commands as desired.
6. To exit the program mode, press the recall button (27) on the
front panel to revert to Program Remote Screen A from Program
Remote Screen B. Press the previous button (30) to return to the
operation menu from Program Remote Screen A.
The
SYSTEM INFORMATION
menu displays AC line frequency, the version
of software that your component is currently using, and information
about the
EEPROM
.
Select
SYSTEM INFORMATION
from the
OPERATION
menu. The
SYSTEM INFOR-
MATION
screen appears:
System Information Screen
System Information
Prev
After reviewing the system information screen, press the previ-
ous key (30) once to return to the operation menu.
Prev
