IMPORTANT:
PLEASE READ BEFORE
STARTING STEP 2,
CONFIGURE DEVICES
The S–1000 is shipped with pre-selected connections for each
device, as well as factory default decoding modes for analog and
digital inputs.
See
Table 1,
on page 15.
To illustrate the method of selecting configuration options available
through the S–1000,
Step 2, Configure Devices,
uses one source
device as an example: a DVD player. Configure each source device
connected to your system completely, before configuring the next
source device, following the steps outlined in this manual. Audio fac-
tory defaults for the S–1000 do not need to be configured if your
system matches the factory defaults.
Some S–1000 configurations are designed for digital only, and some
are designed for analog only. If you try to format an analog source
device using a digital configuration, the menu will not let you proceed.
IMPORTANT
30
Krell S–1000
System Configuration,
continued
Step 2, Configure Devices
HOW TO NAVIGATE
IN THE MENU MODE
1 Press the menu key (29) to enter and
exit the menu mode from the
operational mode.
2 Press the direction keys (33) to scroll
from line to line, and to scroll through
options within a line.
3 Press the enter key (32) to select and
set an option.
4
Use the directional keys to scroll to
the next line.
5
Press the prev key (30) to return to the
previous screen.
6 Press the pre key (1) to exit the menu
mode and place the S–1000 in the
stand-by mode.
