www.kregtool.com
Parts
Clamp Pad Adapter:
The adapter accepts the large pad of all Kreg face clamps and
snaps into the back of the jig, turning clamp and jig into one
assembly for fast jig positioning.
Drill Guide:
This two-hole drill guide keeps your drilling stroke straight and
true. The hardened steel guides are guaranteed for the life of
the tool.
Easy-Press
™
Positioning Sliders:
Adjust these two sliders with a press of your thumb to set the jig
for different workpiece thicknesses.
Chip Release Holes:
Two holes at the base of each drill guide allow wood chips to
escape for fast drilling, reduced heat build-up, and longer drill
bit life.
Mounting Hole:
For tight locations where you can’t use a clamp, secure the jig to
the workpiece by driving a wood screw through this hole.
Clamp Adapter Holes:
Two key-hole slots provide tool-less attachment for the clamp pad
adapter.
Stop Collar | Hex Wrench:
Set drilling depth by positioning the stop collar on the drill-bit
shank.
⅜" (9.5mm) Stepped Drill Bit | #2 Square Driver:
The special drill bit, made of hardened high-speed steel, drills the
pocket hole and pilot hole in one operation. The 6" [152mm]-long
driver bit provides clearance to keep your drill/driver aligned
with the pocket screw.
A
B
C
D
E
F
G
H
