800-447-8638
K4 and K4 Master System Parts
Base
Features setup gauges for positioning the stop collar on the drill bit. Includes four
holes for securing the jig to a workbench or other surface. A recess at the front of
the base accepts a clamp head for temporarily securing the jig to your workbench.
Drill-guide socket
Accepts all Kreg drill guides: Micro, Standard (included), and HD.
Toggle clamp
Secures the workpiece to the jig.
Clamp pad
Adjusts to workpiece thickness.
Standard drill guid
e
Features positioning marks for different workpiece thicknesses.
Drill-guide locking pin
Locks the drill guide into the drill-guide socket at the selected setting.
Step bit
Simultaneously drills a pilot hole and clearance hole, forming a bearing shoulder
for the screw head.
Stop collar
Fastens to the drill bit to control drilling depth.
Hex wrench
Tightens the stop-collar set screw. Stores in a recess at the rear of the base.
Driver bit
#2 square-drive bit 6" (152mm) long.
Pocket-hole plug sample pack
Contains five paint-grade wood plugs
Additional Master System Parts
The K4 Master System includes the following parts
Portable base
Accepts Micro, Standard, and HD drill guide blocks. Useful for large panels or
assemblies that would be difficult to clamp into a bench-mounted jig. Built-in cams
secure the portable base to your Kreg face clamp
Workpiece support stop
Supports large workpieces and incorporates a swing-up, micro-adjustable
workpiece stop.
Vacuum port
Accepts a 1¼" (32mm) shop vacuum hose for efficient chip removal.
Parts
3
A
B
C
D
E
F
G
H
I
J
K
L
M
N
