11
10
What should I expect
from my Sprinta Plus?
How it moves
The powerful turbine harnesses the
pool’s suction to oscillate your Sprinta
Plus’ legs, propelling it in a forward
motion. Its minimal contact with
the pool surface contributes to its fast
speed and efficient cleaning.
The light-weight and compact design
allows it to move all over your pool
floor, navigating itself into
the tightest of corners and moving
freely around any obstacles, making
it ‘unstickable’.
How it Steers
The Intelligent Steering Module
navigates the Sprinta Plus in a
looping pattern that alternates in
direction, ensuring efficient cleaning.
Its ‘unstickable’ reputation is due
to its steering system as it will
automatically turn and release itself
immediately, or after a short delay,
depending on your pool shape.
In combination with the Ultra Flex
hose, this ensures your cleaner is not
restricted or directed by the hose.
How it Cleans
Sprinta Plus cleans your pool daily
with your normal filter cycle by gently
Vortex Vacuuming your pool surface.
Leaves are picked up by the large front
and side scoops and pulled through
the straight-through turbine to the
skimmer box. The Vortex Vacuum aids
in the pick up of heavier debris such
as sand and grit, that can be left by
other cleaners. The Smart-Skim or
Auto Skim uses the excess vacuum to
draw water into your skimmer box to
help reduce floating debris.
The Ultra Flex Hose
The unique Ultra Flex hose rests
just below the water surface due
to its natural buoyancy and hose
weights. The Ultra Flex design
means the hose can flex and bend
easily so that it doesn’t restrict
the movement of your Sprinta Plus.
This increases coverage in your pool.
Re-fitting the Steering System
1.
Re-fit the flow washer to the
underside of the steering system
(there is a cut-out to assist
in locating the correct position).
2.
Align the inlets.
3.
Turn over the steering unit (with
flow washer inserted) and place
on top of the Sprinta Plus. The
inlets will initially be slightly
misaligned.
Rotate the steering unit clockwise
until the steering unit locks
into place. The inlets will now
be aligned and the flow washer
won’t be visible.
