background image

steering system

flow washer (white)

NOTE: Don’t misplace this 

washer

9

8

Sprinta Plus is only cleaning one end or restricted in its coverage

• 

Check that the hose is not coiled or kinked. 

 

To uncoil the hose:

 

• 

 Simply rotate a few of the 1m hose length connectors 
180 degrees until it is straight again.

 

• 

 In hot weather (above 28ºC), remove the cleaner and hose 
from the pool and lay the hose only flat for a day. The heat will 
make the hose relax and uncoil. 

 

• 

 In cooler weather, remove the hose from the pool. Prop both 
ends of the hose around 20cm off the ground. Pour a bucket 
of warm water (50-60º) into the hose until it spills out of the 
other end. Carefully roll the hose side to side to ensure even 
warming. After 5 minutes, fill the hose with cold water – either 
with a bucket, or by placing the hose end onto the pool outlet. 

• 

Check that the return line water flow is directed downwards or 
sideways. Redirect it as necessary with a return line diverter. If that 
still doesn’t work, you my need to purchase an Eyeball Diverter from 
your local Kreepy Krauly retailer.

• 

Check that the hose weights are fitted as described on page 4. 

• 

Remove the steering system to check for obstructions in  
the turbine and that the steering system freely rotates clockwise 
and anticlockwise (see instructions on pages 9-10).

Sprinta Plus is climbing out of the pool

• 

Check if the feet are worn and the front and rear bumpers are 
moving freely. Replace parts as required.

• 

You may have too much vacuum going to the cleaner, check your 
Smart-Skim or Auto Skim is installed and moving freely and isn’t 
jammed or blocked.

Removing the Steering System

1. 

Press in the two tabs located 
on opposite sides on the 
under-side of the steering unit. 
Turn anticlockwise and lift off.

2. 

You should now have three  
separate components as shown. 

 

Clear any obstruction in the turbine.

1

 2

NOTE: 

 For more detailed troubleshooting advice please contact 

your helpful local dealer, or check our online resources for hints, 

tips and other information at www.kreepykrauly.com.au

Summary of Contents for SPRINTA PLUS










Reviews: