6.3 Installing the automatic spray gun
Changing the installation position of the automatic spray gun
To change the installation position of the automatic spray gun, the retaining bolt ( Fig. 3/2) can
be screwed into the adapter ( Fig. 3/1) from the other side.
Fig. 3: Installing the automatic spray gun
1.
Fasten the adapter ( Fig. 3/1) with the retaining bolts ( Fig. 3/2) to a suitable construction.
2.
The main element is either plugged in (
Chapter 6.4.1 ‘Plugged-in design’ on page 19
) or
Chapter 6.4.2 ‘Screw-type design’ on page 20
) depending on the design.
Operating instructions
T-Dok-449-GB-Rev.7
[email protected], www.krautzberger.com
GB–18
Summary of Contents for RA 5
Page 52: ......
