7.8 Change seals
Remove seals on the closing piece
Fig. 14: Closing piece
1.
Remove the closing piece ( Fig. 14/3).
2.
3.
Remove the closing piece ( Fig. 14/3) with the seals ( Fig. 14/2) from the needle stroke
adjustment screw ( Fig. 14/4).
4.
Slide the closing piece ( Fig. 14/3) onto the needle stroke adjustment screw ( Fig. 14/4).
Install seals on the closing piece
5.
Slide the new seals ( Fig. 14/2) onto the needle stroke adjustment screw ( Fig. 14/4).
6.
Screw on the closing piece ( Fig. 14/3) and needle stroke adjustment screw ( Fig. 14/4) with
the screw ( Fig. 14/1).
7.
Screw on the closing piece ( Fig. 14/3).
Operating instructions
T-Dok-009-GB-Rev.3
[email protected], www.krautzberger.com
GB–32
Summary of Contents for HS 25 HV1
Page 56: ......
