7.3
Changing the air and fluid nozzles
Removing the nozzles
1.
Chapter 7.2 ‘Cleaning spray guns’ on page 24
)
Fig. 9: Changing the nozzles
2.
WARNING!
The closing piece (Fig. 9/5) is under spring force!
Carefully unscrew the closing piece (Fig. 9/5).
3.
Loosen clamping nut (Fig. 9/1).
4.
Remove the air nozzle (Fig. 9/2).
5.
Unscrew fluid nozzle (Fig. 9/3).
Always change the fluid nozzle (Fig. 9/3) and fluid needle (Fig. 9/4) at the same time
(
Chapter 7.4 ‘Changing the fluid needle’ on page 26).
Attaching the nozzles
1.
Tighten the fluid nozzle (Fig. 9/3).
2.
Attach the air nozzle (Fig. 9/2) and tighten it with the clamping nut (Fig. 9/1).
3.
Screw on the closing piece (Fig. 9/5).
Automatic spray gun A-10
ENGLISH
■
200-0148
GB–25
