Krautzberger 200-0356, Operating Instructions Manual

Page: 26 / 45

Fig. 13: Disassemble gear box
7. Pull intermediate gear wheel ( Fig. 13/5) with shim ( Fig. 13/14) out of the needle sleeve (
Fig. 13/13).
8. Unscrew the nut ( Fig. 13/7).
9. Pull off the gear wheel ( Fig. 13/6), spring washer ( Fig. 13/9), and pressure disc ( Fig. 13/8)
from the shaft of the turbine wheel ( Fig. 13/3).
Disassembling the compressed-air motor
Fig. 14: Disassembling the compressed-air motor
10. Unscrew screws ( Fig. 14/25) with washers ( Fig. 14/26).
11. Remove bracket ( Fig. 14/23).
Operating instructions
T-Dok-031-GB-Rev.4
mail@krautzberger.com, www.krautzberger.com GB–26