Attaching the material needle
1.
WARNING!
Risk of injury through the use of incorrect spare parts!
CAUTION!
Risk of injury due to material needles!
Insert new material needle into the control piston ( Fig. 8/3).
2.
Ensure that the optional needle stroke adjustment is relaxed. If necessary, release the
pressure by turning anti-clockwise.
3.
Push the completed control piston ( Fig. 8/3) into the main element ( Fig. 8/5).
4.
Press the pressure spring ( Fig. 8/2) with the cover ( Fig. 8/1) or the optional needle stroke
adjustment.
5.
Tighten the cover ( Fig. 8/1) or the optional needle stroke adjustment
6.
After assembly, check the tight fit of all parts.
7.
Check moving parts to make sure they run easily.
Mini spray gun MA-1
ENGLISH
■
200-0345
GB–31
Summary of Contents for 1050-090-1127
Page 44: ......
