Attaching the nozzles
1.
WARNING!
Risk of injury through the use of incorrect spare parts!
Remove/unscrew air nozzle.
2.
Insert/screw in new air nozzle and material nozzle.
3.
Tighten cap nut ( Fig. 7/3) again.
8.5 Changing the material needle
Removing the material needle
Fig. 8: Removing the material needle
1.
WARNING!
The optional needle stroke adjustment is subject to spring force.
Unscrew the cover ( Fig. 8/1) or the optional needle stroke adjustment (locking piece).
2.
Remove the pressure spring ( Fig. 8/2).
3.
Pull out the control piston ( Fig. 8/3) from the main element ( Fig. 8/5) together with the
material needle ( Fig. 8/4).
4.
CAUTION!
Risk of injury due to material needles!
Remove the material needle ( Fig. 8/4) from the control piston ( Fig. 8/3).
Operating instructions
T-Dok-015-GB-Rev.0
[email protected], www.krautzberger.com
GB–30
Summary of Contents for 1050-090-1127
Page 44: ......
