17
KRAUSMANN POWER TOOLS
U72020-00B
English |
EN
failure.
Do not place batteries in a tool box or pock-
et with nails, screws, keys, etc. Fire or injury
may result.
Have your power tool serviced by a
qualified repair person using only genuine
replacement parts. This will ensure that the
safety of the power tool is maintained.
Follow instruction for lubricating and chang-
ing accessories.
K
eep handles dry, clean and free from oil
and grease.
Service
7
6
5
4
3
8
3. Specific safety regulations
Wear ear protectors. Exposure to noise can
cause hearing loss.
Hold power tools by insulated gripping sur-
faces when performing an operation where
the cutting tool may contact hidden wiring
or its own cord. Contact with a “live” wire will
make exposed metal parts of the tool “live”
and shock the operator.
W
ear a hard hat (safety helmet), safety
glasses and/or face shield. Ordinary eye or
sun glasses are NOT safety glasses. It is also
highly recommended that you wear a dust
mask and thickly padded gloves.
Βe sure the bit is secured in place before
operation.
Under normal operation, the tool is designed
to produce vibration. The screws can
come loose easily, causing a breakdown or
accident. Check tightness of screws carefully
before operation.
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adher-
ence to electric power tools’ safety rules. If you
use this tool unsafely or incorrectly, you can suffer
serious personal injury.
1
2
10
11
9
I
n cold weather or when the tool has not
been used for a long time, let the tool warm
up for a while by operating it under no load.
This will loosen up the lubrication.
Always be sure you have a firm footing. Be
sure no one is below when using the tool in
high locations.
Hold the tool firmly with both hands.
Κeep hands away from moving parts.
Do not leave the tool running. Operate the
tool only when hand-held.
Do not point the tool at any one in the area
when operating. Parts could fly out and injure
somenone seriously.
Do not touch parts close to the bit immedi-
ately after operation; they may be extremely
hot and could burn your skin.
S
ome material contains chemicals which
may be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
12
13
Additional safety regulations for
cordless impact drills
Always charge the battery pack between
temperatures 0°C to 30°C. Ideal charging
temperature is 18°C to 24°C.
O
nly use the charger provided, no other
battery is suitable.
Always remove the charger immediately after
re-charging is completed or when not in use.
Y
our tool will be warm when working, this
is normal. Accessories and metal plates can
become very hot.
Always check walls, floors and ceilings for
hidden power cables and pipes.
T
his appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or instruc-
tion concerning use of the appliance by a
person responsible for their safety. Children
should be supervised to ensure thet they do
not play with the appliance.
B
efore working on a component, ensure that
the component is held down using a vice or
The KRAUSMANN
®
UN1 POWER 20V
battery can be used with all 20V
power tools bearing this marking.
