19
KRAUSMANN POWER TOOLS
U71020-00B
8
7
1
2
English |
EN
Always switch off the tool before insertion or
removal of the battery pack. To remove the battery
pack, withdraw it from the tool while pressing the
release button. To insert the battery pack, align the
tongue on the battery pack with the groove in the
housing and slip it into place. Always insert it all the
way until it locks in place with a little click. If not,
it may accidentally fall off the tool, causing injury
to you or someone around you. Do not use force
when inserting the battery pack. If the pack does
not slide easily, it is not being inserted correctly.
Removing or inserting the battery
pack
WARNING:
When battery charge runs out after continuous use or
exposure to direct sunlight or heat, allow time for the tool
to cool down before re-charging to achieve the full charge.
Power supply
Rotation speed
Chuck
Torque
Impact rate
Adjustable torque
Drilling capacity in
Masonry
Steel
Wood
Tool weight
20 V
0-450/0-1700 rpm
13 mm, automatic
45 Νm
0-25500 ipm
21+3
13 mm
13 mm
38 mm
1.055 kg
Tool
U71020-00B
Switching the tool ON and OFF
To switch the tool on, push the ON / OFF switch
1
(fig 1). To turn the tool off, release the ON / OFF
switch
1
. The ON / OFF switch is fitted with a brake
function which stops your chuck immediately
when you quickly release the switch. The variable
speed control enables you to select the best speed
for a particular job. The further you squeeze the
switch, the faster the drill will operate.
WARNING:
D
o not operate for long periods at low speed because
excess heat will be produced internally.
fig 1
The tool has a light sensor
8
and allows the LED
light
7
(fig 2) to operate or not depending on the
brightness in the workplace. The LED light allows
you to keep a clear view under less illuminated
circumstances.
Using the working LED light
fig 2
The rotation direction of the drill chuck
6
can be
changed using the rotation direction switch
2
(fig 1).
To change the direction of rotation, stop the
machine and turn the left / right switch
2
in
the desired direction (fig 1).
T
he central position of the left / right switch
2
locks the ON / OFF switch
1
.
B
efore beginning to work, check that the
rotation direction switch
2
is in the desired
position in order to avoid potential damage
Left / right motion direction
Unlike simple engines that contain carbon brushes, the
KRAUSMANN® BRUSHLESS engine eliminates this waste of
energy that carbon brushes need to produce friction. This
increases autonomy, performance and service life of the
tool, making it ideal for heavy-duty work.
