10
WARNING:
Turn the device off, disconnect it from the mains and wait until it cools down before cleaning
or maintenance to avoid electric shock or burn.
Wear ear defenders
Wear safety goggles
Wear a dust mask
This tool has been checked by the manufacturer. From the date of purchase by the final consumer, a two
year warranty for
amateur use
covers any faulty material and manufacturing. The receipt or invoice of pur
-
chase needs to be displayed in case of a repair that is covered by the warranty. For possible faults during
the warranty period, you should address your issue to the retail shop from which the purchase was made.
6. Warranty
Terms of warranty
The tool has been used properly and for the purpose for which it was purchased.
T
he tool presents a problem that is due to faulty material and manufacturing.
Incapability of the tool to perform according to the technical specs provided.
Damages are not covered by the warranty that are due to causes such as:
W
ear due to improper use.
P
artial or total disassembly.The tool’s shell must be disassembled only by personnel
authorised by the official distributor.
Damage due to overloading.
Usage of incorrect or incompatible accessory.
Bad maintenance from the operator or any other third party.
Wear that was induced by external factors or rogue particles (dust, debris etc.)
W
ear due to non compliance with the instructions in this manual.
If, during the warranty period, there is a fault that can not be repaired from the authorised service
department, the tool will be replaced without any extra cost.
The warranty is valid only when:
chloride, chlorinated cleaning solvents, ammonia and household detergents that contain ammonia.
T
he brushes and commutator in your tool have been engineered for many hours of dependable service.
To maintain peak efficiency of the motor, we recommend every two to six months the brushes be
examined.
St
ore the tool, operating instructions and where necessary the accessories in the original packaging. In this
way you will always have all the information and parts ready to hand.
