background image

7

Manual

www.kraun.com

Last, Use KraunView program to see the video

Figure 2-5 is the running window of the KraunView program. If the computer and video server product 

is connected to the same network, the video server product ID will be displayed in the “Auto Search” list. 

You can double click the “Auto Search” to search all the connected video server products any time. The 

only thing left right now for seeing the video is to double click the video server product ID item in the 

“Auto Search” list. For example, if the video server product ID is 001-001-029, you can then double click the 

001001029 item in the “Auto Search” list to view the video. A window asking for password input will pop 

up. Please key-in the password in your ID/Password card into this field and click “ok”. The video will then be 

displayed on the window.

Figure 2-4: The ID/Password card

Notice : 

1.  You can modify this play-video password by entering into the web configuration pages. Please refer 

to section 3.5 for more information.

2.  You can also add the video server product into the CameraList in the KraunView software to have 

more convenient video display, please refer to the user manual of the KraunView software for more 

functions.

Summary of Contents for Video Server





































Reviews: