Page
6
of
19
IMPORTANT SAFEGUARDS (cont.)
Electrical Connection
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety,
this appliance must be properly grounded. The power cord of this appliance is equipped with a 3-prong grounding
plug that mates with a standard 3-prong grounding wall outlet to minimize the possibility of electric shock hazard from
the appliance. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly
grounded. The
appliance
should always be plugged into its own individual electrical outlet which has a voltage rating
that matches the rating label on the appliance. This provides the best performance and also prevents overloading
house wiring circuits which could cause a fire hazard from overheated wires. Repair or replace immediately all power
cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along
its length or at either end. When moving the
appliance
, be careful not to damage the power cord.
Refrigerant Disposal
If you are throwing away your old appliance it may have a cooling system that uses “Ozone Depleting” chemicals or a
Flammable Refrigerant. Make sure the refrigerant is removed and properly disposed of In Accordance With Local
Regulations by a qualified service technician.
CASTER INSTALLATION
NOTE: There are 4 casters to install. Install the 2 with brakes on front of unit and install the 2 without brakes on rear
of unit.
1.
Remove 4 screws (1), lock washers (2) and flat washers (3). Remove skid (4) from bottom of unit (5).
2.
Screw in the 4 provided stem casters (6) into the base (7) of the unit (5) where the skid mounting screws were
removed.
5
4
2
3
7
6
1
