KRATKL LEO SERIES, Installation And Operating Instruction, Page: 51 / 124

51
figure 8. The procedure for removing the inspection element
figure 9. The way of routing out and sealing the capillary cable, the magneto wire, the tube of the
main burner and the tube of the control burner
passing individual wires through the casing of the gas insert, pay close attention to how they are
sealed. Sealing is achieved by means of special bushings and heat- resistant paper. Other elements
should be sealed with high-temperature silicone.
NOTE!!!
All activities associated with connecting the device to the gas installation should be carried
out with the power disconnected. The insert installation can only be done by a qualified fitter/
technician with appropriate licences.
NOTE!!!
It is absolutely forbidden to use open fire during the installation process of the gas insert.
Failure to follow instructions could result in fire or explosions, causing severe damage, bodily
injury or even death.