5
Description
With delayed motor cut-out
Frequent, work-necessitated switching on and off of motors on
machines of this size puts a heavy load on the power network
and causes increased wear on internal electrical parts. That’s why the motor on
the new KRÄNZLE switches itself off 30 seconds after the trigger is released, and
switches itself back on again when the trigger is pressed.
When running your high pressure cleaner with hot water of 80° C
raised temperatures occur.
Do not touch the machine without
safety gloves!
CAUTION !
CAUTION !
Never use liquid containing solvents such as paint thinners, petrol, oil
or similar liquid matter.
Pay attention to the instructions of the
manufacturers of the cleaning agents.
The seals in the machine are
not resistant to solvents. The spray of solvents is inflammable, explo-
sive and poisonous.
Setting up
Location
Neither set up and operate the machine in rooms where there is a risk
of fire or explosion nor put it into puddles. Do not use the machine
under water.
Replacements and inspection work should only be performed by
qualified persons
when the machine is disconnected from the
power supply, i.e. pull out the plug from the electrical socket.
Summary of Contents for W 11/135
